Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Fast, Reliable Chimney Repair Across Evansville
If your fireplace smells like last winter, your chimney crown is crumbling, or a home inspector flagged the flue, you’re in the right place. Chimney repair in Evansville is mostly about one thing: chimneys built a century ago that were never designed for what’s venting into them today. We work the older brick stacks in Riverside, Jacobsville, and the near-downtown historic blocks often enough to know what a cracked clay liner and spalled mortar joint look like before we climb the roof. Call (833) 365-6875 and we’ll take a look.
Why Evansville Homeowners Call Chimney Sweep Evansville for Chimney Repair
We’re a chimney-only operation, which matters more than it sounds. Every job, every day is chimney work – no rotating through HVAC calls or roofing with a chimney on the side. That focus sharpens the diagnostic instincts: we read a smoke chamber the way a generalist never gets a chance to.
Evansville homeowners call us back because we inspect before we sweep. That means a camera goes up the flue and you see what we see, in plain language, with no upsell pressure. If a repair can wait, we’ll tell you it can wait. Our technicians have up to 13 years of experience, and they’ve seen enough cracked liners to spot one on a quick scan.
We work across the whole city and out toward the surrounding towns, so getting a technician scheduled in Evansville doesn’t mean a long wait for a specialist who’s only in town twice a month. That’s the advantage of being a dedicated chimney repair outfit that already has local knowledge of what these homes are made of.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Chimney Cap Installation in Evansville
Chimney Cap Installation in Evansville is worth doing on any uncapped masonry stack, and it’s the cheapest insurance against water damage you’ll ever buy for an older home. A cap keeps rain out of the flue, keeps birds and squirrels from nesting, and stops the spark-and-ember fallback that can happen when a wood fire is running. On the older brick chimneys in Jacobsville and Riverside, where uncapped flues have been taking in rain for decades, capping is often the first step after a sweep.
A typical cap installation in Evansville runs $250 – $600 depending on the flue size, the cap material, and how many flues the chimney has.
What a proper cap does
A good cap fits the flue tightly and is anchored into the crown, not just set on top. A loose cap rattles in wind, lets rain in around the edges, and does more damage than good. We size it to the actual flue, not a shelf stock size.
When to install one
If your chimney is uncapped or the cap is missing parts, that’s the moment. Capping an open flue keeps water out of the firebox and slows efflorescence and mortar deterioration. On a gas insert or wood stove vented into a masonry stack, a cap with the right spark screen is part of a proper installation.
Chimney Cap Replacement in Evansville
Chimney Cap Replacement in Evansville usually comes up when a cap that’s been on the chimney for years has rusted out, cracked at the seams, or lost its spark screen to rust. A damaged cap does the opposite of its job: it traps moisture, blocks draft, and lets rain find its way into the flue. We replace caps on masonry stacks and factory-built fireplaces alike, and on the 1950s-70s ranches on Evansville’s east and north sides we often find a factory-built cap that has been through one too many ice storms.
Replacing a cap in Evansville typically runs $200 – $475 – often less than a new installation since the flue collar and crown anchors are already in place.
Signs your cap needs replacing
Rust streaks down the chimney, a wobbling cap, or missing screen sections are all worth a look. So is a cap that sits crooked after a storm. If you’re not sure, that’s what the inspection is for.
Replacement versus repair
If a cap is dented but structurally sound, a repair may be enough. If the mesh is gone or the frame is rusted through, replacement is the honest answer. We’ll tell you which and back it with photos.
Trusted Brands We Service in Evansville
We don’t stock parts on a truck or warehouse a supply of liners – what we do is work with professional-grade chimney brands so we can size and specify the right system for what we find. That roster includes HeatShield, Gelco, Olympia Chimney, Famco, and others, and we can handle relining with DuraFlex flexible liner systems when the flue demands it. Those are the same materials the trade specifies. Sourcing through established distributor channels means we aren’t stuck waiting weeks for a specialty part when a reline is scheduled. It also means the liner we put in Evansville is going to be serviceable later, not an odd size nobody carries.
See the difference
Before
After
Before
After
Before
AfterCommon Chimney Repair Problems We See in Evansville Homes
- Cracked clay tile liners. The humid winters and freeze-thaw cycles off the Ohio River crack original clay tiles, and once they crack, creosote seeps behind them toward the brick. On Evansville’s older stacks, this is the most common hidden problem.
- Uncapped flues taking in rain. In Jacobsville and Riverside, an uncapped chimney pulls in rain year after year, creating efflorescence and mortar deterioration that weakens the crown. Capping it early prevents the rebuild later.
- Spalling mortar and brick. The freeze-thaw pattern pops mortar joints and spalls brick faces, especially on chimneys that face the prevailing weather. Repointing and rebuilding are both on the table depending on how deep the damage runs.
- Appliances vented into the wrong stack. Gas inserts and wood stoves installed into masonry stacks never designed for them cause draft problems and accelerate third-degree creosote glazing. The fix usually starts with a proper flue sizing and, often, a liner.
Pricing for Chimney Repair in Evansville, IN
Repair pricing here depends on what the camera finds up the flue, and we want you to know the ballpark before we climb the roof. A typical chimney cap installation in Evansville runs $250 – $600, with replacement in the $200 – $475 range. Relining – HeatShield resurfacing or a DuraFlex flexible liner sized to the appliance – generally runs $2,200 – $6,500 depending on length and liner type. Masonry repointing and tuckpointing on an older brick stack typically runs $600 – $2,500. Waterproofing runs $350 – $900. The written estimate is the actual price, and the estimate visit is free. We don’t recommend any of it without a camera inspection you can look at yourself.
We Also Serve Cities Near Evansville
We cover the towns around Evansville too, including Melody Hill, Highland, Darmstadt, and Chandler. The work is largely the same – older masonry stacks, humid-winter freeze-thaw, and the occasional factory-built fireplace on a newer ranch – and the camera and inspection process is identical. If your chimney is a short drive from Evansville, it’s worth a call.
Serving Evansville, IN – Our Local Coverage Area
We serve Evansville and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs About Chimney Repair in Evansville
Because the damage is almost always behind the flue wall, where you can’t see it without a camera. Clay tile cracks, creosote glazing, and mortar deterioration in Evansville’s older stacks don’t show up from the firebox, and the only way to know what’s actually up there is to look with a Level 2 camera inspection. That’s why we inspect before we sweep, and why we don’t recommend a repair without showing you the footage. Call (833) 365-6875 for an exact quote.
Usually, yes. In most cases a cracked clay tile liner in an Evansville home can be relined without demolishing the chimney, using HeatShield resurfacing or a DuraFlex flexible liner sized for the appliance venting into the flue. Whether that works depends on how much of the original tile is intact and how much mortar is failing, which the camera tells us. Call (833) 365-6875 to schedule an inspection and get a written estimate.
You can’t confirm it by eye from the firebox – third-degree creosote is glazed and hardened onto the flue wall, and it takes a camera or a technician’s pick to identify it. The warning signs are a strong creosote smell, a fire that drafts poorly, or a recent stove installation into a stack that wasn’t designed for it. If you’re seeing any of those, it’s worth an inspection. Call (833) 365-6875 for a free estimate.
Installation is putting a cap on a chimney that has none or has never been covered; replacement is taking off a failing cap and fitting a new one. Both happen on Evansville stacks regularly, but they’re priced differently – installation runs $250 – $600 and replacement $200 – $475 – and the inspection tells us which you need. Call (833) 365-6875 to book a look.
The Ohio River valley’s humid winters and freeze-thaw cycles do damage that milder or drier climates don’t – water works into mortar joints and tile liners, freezes, expands, and cracks them, then refreezes the next cold snap. Add the ice storms that knock out power and push homeowners onto wood heat, loading flues with fresh creosote, and you have a repair cycle that’s genuinely faster here. It’s also why a routine sweep in Jacobsville often ends in a relining estimate rather than a simple brushing. Call (833) 365-6875 – we’ll show you the evidence before recommending anything.
If your chimney needs a look, call (833) 365-6875 for a free estimate. We answer 24/7, and fast dispatch from 7am to 7pm, Sunday through Friday. We’ll inspect first, show you what’s actually up there, and tell you in plain language what needs fixing and what can safely wait.
Written by the team at Chimney Sweep Evansville.