Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
See the difference
Before
After
Before
After
Before
AfterHow Much Does Chimney Repair Cost in Evansville?
Chimney repair in Evansville typically costs $225 to $450 for a routine fix such as a crown patch or a new rain cap, $600 to $1,800 for mid-level work like flashing repair or a partial reline, and $2,500 to $6,500 for a full stainless liner replacement on a single flue. Most homeowners we hear from land in the $400 to $1,200 range once the inspection turns up the actual problem. The written estimate you get after an inspection is what sets your final price, and that estimate is free.
Key Takeaways
- Routine repairs run $225 to $450; structural and relining work runs much higher.
- An inspection before any repair is what keeps you from paying twice for the same problem.
- Evansville’s freeze-thaw winters are hard on masonry crowns and flue tile, which is where most repair money goes.
- HeatShield resurfacing can restore a deteriorating flue for a fraction of a full rebuild.
- Free estimates, upfront pricing, and a plain-language report of what we find.
Chimney Repair Cost Breakdown (2026)
Here’s how the numbers shake out for the work we see most often in Evansville. These are typical estimated ranges for the local market, not quotes. Your written estimate is the real number.
| Repair | Typical Cost Range | What It Covers |
|---|---|---|
| Crown repair or rebuild | $350 – $1,200 | Patching cracks or rebuilding the concrete crown that sheds water off the top |
| Rain cap and spark arrestor | $225 – $550 | Stainless cap fitted to the flue to keep out rain, animals, and debris |
| Flue tile crack repair (HeatShield resurfacing) | $900 – $2,200 | Resurfacing the inside of a cracked clay flue with a contractor-grade liner system |
| Partial or full stainless reline (DuraFlex) | $2,500 – $6,500 | New flexible stainless liner for a single flue, sized to the appliance |
| Flashing repair | $400 – $900 | Resealing or replacing the metal where the chimney meets the roof |
| Masonry tuckpointing | $500 – $2,000 | Repointing deteriorated mortar joints in the chimney stack |
| Firebox repair | $600 – $2,500 | Rebuilding or relining the firebox where the fire actually burns |
| Damper replacement | $350 – $800 | New throat damper or top-sealing damper to control draft and heat loss |
What pushes a repair toward the top of a range? Access, height, and how much of the flue is compromised. A crown patch on a low chimney is straightforward. A full reline on a two-story stack with a badly cracked flue and a rotten firebox is a different job entirely. We inspect before we sweep, so you know exactly what’s up there before any number gets attached to it. From the firebox to the crown, we handle it all in one visit, which means you’re not calling a mason for one piece and a sweep for another.
One thing worth saying plainly: the biggest cost driver is usually delay. A $400 crown repair that waits a few seasons turns into a $1,200 crown rebuild and water-damaged framing. Evansville gets enough freeze-thaw cycling each winter to make that a real risk, not a scare tactic.
What Affects Chimney Repair Pricing in Evansville
Two houses on the same block can get two very different estimates. Here’s why.
- Winter freeze-thaw. Evansville sits in a climate where water gets into masonry, freezes overnight, and expands. Cracks in a crown or mortar joints widen a little each season. Repairing before winter costs less than repairing after it.
- Chimney height and roof access. A tall stack, a steep roof pitch, or a chimney on the back slope of the house all add setup time and safety gear. That labor shows up in the price.
- Flue condition and liner type. A cracked clay flue tile is cheaper to resurface with HeatShield than to demolish and rebuild. A flue with no liner at all, or one that’s been damaged by a past chimney fire, needs a full DuraFlex reline, and that’s the single biggest line item on most repair tickets.
- What’s burning in it. A wood-burning fireplace, a gas insert, and a solid-fuel stove each need a different liner sized to the appliance. The wrong size is a safety issue and a cost issue, so we match the liner to what you actually burn.
- Water damage already inside. Staining on the ceiling, spalling brick, or rusted damper hardware means moisture has been getting in for a while. That’s more repair than a crack you caught early.
- Whether it’s been inspected before. New homeowners who inherited a fireplace with no history often need the full picture first: an inspection that maps the flue from top to bottom before anyone quotes a repair.
We carry professional-grade brands including DuraFlex, HeatShield, Gelco, Olympia Chimney, Famco, and Copperfield. That matters for pricing because it means we’re not quoting a repair we have to hand off. We use the same materials the pros specify, and we can do the reline work most sweep-only operations refer out. It also means you get one estimate for the whole job instead of three from three different contractors.
Repair or Replace? How to Think About the Big Number
When a chimney needs a full reline, homeowners reasonably ask whether it’s worth it. A full stainless reline typically runs $2,500 to $6,500 in Evansville. A chimney rebuild, where the stack comes down and goes back up, can run several times that. In most cases the reline is the better value by a wide margin, because it restores the flue without touching the exterior masonry. HeatShield resurfacing sits in the middle: it restores a deteriorating flue’s interior surface without demolition, and it’s the industry standard for that specific job. We’ll tell you what we find, in plain language, with no upsell pressure, and let you weigh it.
If your home inspector or insurance company flagged the chimney, that report usually tells you which category you’re in. Bring it to the inspection. It helps us confirm what they saw and quote the fix accurately the first time.
How to Save on Chimney Repair
You can’t avoid every repair, but you can keep most of them small.
- Get the inspection first. An inspection that catches a hairline crown crack saves you the water-damage repair that follows. Small money now, big money later.
- Fix the water path before the masonry. A properly fitted rain cap and sound flashing keep most of Evansville’s weather out of your chimney. Those are among the least expensive repairs on the list and prevent the most expensive ones.
- Sweep on a schedule. Creosote buildup is a fire risk, and it also hides flue damage until it’s severe. A regular Chimney Sweep Evansville visit keeps the flue clear so problems surface early.
- Bundle the work while we’re up there. If a crown repair and a rain cap both need doing, doing them on one visit saves the setup and access cost of two trips.
- Ask for the written estimate before anything starts. We give you one, free, with the price set per job. No surprises on the invoice.
When Should You Call for Chimney Repair in Evansville?
Call when you notice any of these: a strong draft or smoky backup, crumbling mortar or brick spalling on the exterior, staining or a musty smell near the fireplace, a damper that won’t open or close smoothly, or visible cracks in the firebox. Those signs point to a repair that’s cheaper now than it will be after another winter.
The dangerous part deserves its own paragraph. Flue gases, carbon monoxide, and chimney fires are serious. We don’t hand out do-it-yourself instructions for opening up a flue or working on a firebox, because that work belongs with a trained professional. If you suspect a crack, a blockage, or a liner problem, stop using the fireplace until someone qualified has looked at it. That’s the honest advice, even when it costs us a job. Chimney repair is what chimney repair specialists do all day, every day, which means we catch the things a generalist might miss.
What Happens When You Call
We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday. We’re closed Saturday, so a call that comes in on Saturday gets booked into the next opening on Sunday. When we arrive, we inspect before we sweep, show you what we found, and give you a written estimate before any repair begins. Same-day service is often possible when you call early. Estimates are free and the price is set per job, so you know what you’re approving.
Our technicians have up to 13 years of experience, and every job, every day is chimney work. No divided attention across trades. That focus is why we can diagnose a flue problem quickly and why we stock the liner systems and resurfacing materials to actually fix it, rather than tag another contractor in.
FAQs – Chimney Repair Cost
How much does chimney repair cost in Evansville?
Chimney repair in Evansville typically ranges from $225 to $450 for a simple fix like a rain cap or small crown patch, up to $2,500 to $6,500 for a full stainless reline. The written estimate after inspection sets your exact price. Call (833) 365-6875 for a free estimate.
Is it cheaper to repair a chimney or replace it?
Repair is almost always cheaper than replacement. A full reline at $2,500 to $6,500 costs a fraction of a chimney rebuild, and HeatShield resurfacing at $900 to $2,200 restores a deteriorating flue without demolition. Call (833) 365-6875 to find out which one your chimney needs.
Do I need a chimney inspection before a repair?
Yes, and it’s the most important step. An inspection typically prevents you from paying twice for a repair that doesn’t fix the real problem. We inspect before we sweep so you know exactly what’s up there, then quote the repair from what we find. Call (833) 365-6875 to book one.
Can you reline my chimney?
Yes. Full relining with DuraFlex flexible stainless liner systems runs $2,500 to $6,500 for a single flue, and HeatShield resurfacing for deteriorating flue tiles runs $900 to $2,200. That’s reline work most sweep-only companies can’t perform. Call (833) 365-6875 for an estimate.
How much does a cracked flue cost to fix in Evansville?
Cracked flue tile repair with HeatShield resurfacing typically runs $900 to $2,200. If the damage is extensive or the flue has no liner, a full DuraFlex reline at $2,500 to $6,500 may be needed. Call (833) 365-6875 and we’ll tell you which one applies.
Can you come today?
Same-day service is often possible when you call early. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday. Call (833) 365-6875 for a free estimate and we’ll book the next opening.
If your chimney is on the list for a repair, or you’re not sure it is, the cheapest thing you can do is find out. Call (833) 365-6875 for a free estimate. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday. We’ll inspect, explain what we find in plain language, and give you a written price before anything starts.
Pricing reflects the Evansville market as of 2026. Chimney Sweep Evansville offers free estimates – call (833) 365-6875.
Written by the team at Chimney Sweep Evansville.
What Our Customers Say
"Level two inspection before we bought the house. The report was detailed enough to use as a negotiating point and he explained every photo in it."
- Craig Doyle"Creosote buildup was worse than I realized. He measured it, showed me the glazing on the flue with the camera, and was honest that we were closer to a chimney fire than I wanted to hear."
- Carrie Whitaker"Good work. The written inspection report took about a week to arrive after I asked for it, which was slower than I expected."
- Jennifer Delaney