Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
See the difference
Before
After
Before
After
Before
AfterHow Much Does Chimney Liner & Rebuild Cost in Evansville?
Chimney liner and rebuild work in Evansville typically runs $1,800 to $5,500 for a standard stainless liner installation, while partial rebuilds land around $2,500 to $7,000 and full chimney rebuilds can reach $9,000 to $18,000 depending on height, access, and how much of the original masonry can be saved. Resurfacing a failing flue with a cast-in-place liner system usually costs $1,200 to $2,800 and is the least disruptive option when the existing tile structure is still sound. Every number below is an estimate for the Evansville market in 2026, and the written estimate we prepare after inspection sets the final price.
We inspect before we sweep, so you know exactly what’s up there before anyone quotes a number. A clean chimney is a starting point. A safe chimney is the goal.
Key Takeaways
- Stainless liner installs in Evansville generally fall between $1,800 and $5,500 for a single flue.
- HeatShield resurfacing is usually the cheapest path when tile joints are cracked but the flue is structurally intact.
- Partial rebuilds (crown, top courses, flashing) run $2,500 to $7,000; full rebuilds can exceed $16,000.
- We work with DuraFlex, HeatShield, Gelco, Olympia Chimney, Famco, and Copperfield materials, so the fix matches what the flue actually needs.
- Our technicians have up to 13 years of experience, and estimates are free. Call (833) 365-6875.
Chimney Liner & Rebuild Cost Breakdown (2026)
Here’s how the numbers break down for a typical Evansville home with a wood-burning fireplace or a gas insert. These are estimates only. The written estimate after inspection is what counts.
| Service | Typical Estimate Range | Notes |
|---|---|---|
| Level 2 video inspection | $150 – $400 | Required before any liner decision; camera runs the full flue. |
| Chimney sweep (single flue) | $150 – $300 | Often bundled into a reline visit. |
| HeatShield flue resurfacing | $1,200 – $2,800 | Restores cracked tile joints without demolition. |
| DuraFlex stainless liner, single flue | $1,800 – $5,500 | Insulated flexible liner, top plate, and cap included. |
| Liner for a two- or three-story chimney | $3,500 – $7,500 | Height and length of run drive the price up. |
| Crown rebuild | $800 – $2,000 | New poured or formed crown with proper overhang and slope. |
| Partial rebuild (top courses, flashing) | $2,500 – $7,000 | Corrects spalled brick near the crown and roofline. |
| Full chimney rebuild | $9,000 – $18,000 | Full teardown and rebuild to the height above the roofline. |
| Chimney cap and top plate | $150 – $600 | Famco and Olympia caps included in most liner jobs. |
What pushes cost up: chimney height, how many flues need work, roofline access, whether the existing liner has to be removed, and whether the crown or several courses of brick are spalling near the top. What pulls it down: a flue that can be resurfaced instead of relined, a straight single-flue run, and getting the inspection done before water damage spreads. We work with professional-grade brands like DuraFlex, HeatShield, Gelco, Copperfield, Olympia Chimney, and Famco, so we’re not locked into one material and can match the fix to the flue.
For the full picture of how inspection, sweep, and repair fit together in one visit, see chimney sweep evansville.
What Affects Chimney Liner & Rebuild Pricing in Evansville
- Chimney height and flue count. A one-story ranch with a single flue is a simpler job than a two-story with a rear chimney and a fireplace insert flue. Every extra foot of liner and every additional flue adds material and time.
- Whether the tile can be saved. If the flue tiles are cracked at the joints but otherwise solid, HeatShield resurfacing can run at a fraction of a reline. If tiles are missing, offset, or the flue is unlined, a full DuraFlex stainless install is the right call.
- Masonry condition at the top. Evansville winters swing between freezing nights and mild days, and that freeze-thaw cycle is hard on brick and mortar near the crown. Spalled brick, a cracked crown, and failed flashing all add to the rebuild line.
- Access to the roofline. A steep roof pitch, a chimney against a dormer, or a valley that limits where a ladder can sit all add setup time and safety work.
- Appliance type. A wood-burning fireplace, a gas insert, and a freestanding solid-fuel stove each need different venting and different liner specs. Matching the liner to the appliance matters for clearance and draft.
- Hidden damage found on inspection. A Level 2 video inspection often finds things a sweep can’t see, like a broken flue tile three feet down or rusted ties behind the brick. Finding it early saves money; finding it late costs more.
How to Save on Chimney Liner & Rebuild
Get the inspection before you get a quote. Many homeowners call three chimney companies after a home inspector flags the flue, and each one quotes a different job because none of them ran a camera. A Level 2 inspection with video gives every bidder the same facts. It’s the cheapest way to avoid paying for a rebuild you don’t need, or relining a flue that only needed resurfacing.
A few things that genuinely hold the line on cost:
- Resurface before you reline. If the tiles are intact, HeatShield resurfacing is usually well under the cost of a full stainless liner.
- Don’t put off crown repair. A crown that’s cracked lets water into the brick, and water damage in Evansville’s freeze-thaw winters is what turns a $1,000 crown job into a partial rebuild.
- Check the liner against the appliance. If you’re switching from wood to a gas insert, the original flue may need a properly sized liner for the new appliance. Getting that right up front saves relining twice.
- Ask what’s included. A liner quote should include the cap, top plate, insulation, and the inspection that justified the work. A low bid that leaves out the cap isn’t a lower price, it’s a smaller job.
We’ll tell you what we find in plain language, with no upsell pressure. Estimates are free, and we’ll lay out each option so you can decide. Call (833) 365-6875 to schedule one. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday. We’re closed Saturday.
Can a Chimney Liner or Rebuild Be Done the Same Day?
A stainless liner install on a single flue is usually a one-day job, and HeatShield resurfacing is typically done in a single visit. Rebuilds almost never finish in one day. Crown work and partial rebuilds usually need at least two visits because mortar has to cure. Full rebuilds run several days and depend on weather and material staging.
Same-day service is possible when the inspection and the reline are scheduled together. Call (833) 365-6875 for an exact schedule and a free estimate. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Is It Cheaper to Repair or Replace a Chimney Liner?
Repair is almost always cheaper when the flue structure is sound. Resurfacing with HeatShield typically runs $1,200 to $2,800 versus $1,800 to $5,500 for a full DuraFlex liner install, so if the tiles are intact you’ll save a meaningful amount. Replacement makes more sense when the flue is unlined, tiles are offset or missing, or the appliance needs a specific liner for clearance and draft. A Level 2 inspection settles the question in one visit. Call (833) 365-6875 for a free estimate.
Do I Need a Permit for a Chimney Rebuild in Evansville?
Most chimney rebuilds that touch the structure, the roofline, or the venting path require a permit in Evansville, but the exact rule depends on the scope. A liner install usually does not need a separate permit, while a rebuild that changes the chimney’s footprint or height almost always does. Ask your city’s building department before work starts. It’s the right habit, and we’ll flag what a permit applies to when we write your estimate. Call (833) 365-6875 with questions.
When Should a Chimney Be Rebuilt Instead of Repaired?
A chimney should be rebuilt when the damage runs through the structure, not just the surface. That means spalled brick that goes several courses deep, a chimney that’s pulling away from the house, a flue with broken or missing tile across most of its run, or mortar joints that are failing throughout. When the damage is surface-level (a cracked crown, a failed cap, some spalling near the top), a partial rebuild or repair is the right call and costs a fraction of a full teardown. We’ll tell you where the line is, in plain language, and you decide.
FAQs – Chimney Liner & Rebuild Cost
How much does a chimney liner cost in Evansville?
A stainless chimney liner in Evansville typically costs $1,800 to $5,500 for a single flue, installed with an insulated liner, top plate, and cap. Taller chimneys and two-flue jobs push toward $7,500. HeatShield resurfacing, when the tiles are intact, runs $1,200 to $2,800. Call (833) 365-6875 for an exact quote. Estimates are free.
How much does a chimney rebuild cost in Evansville?
A partial chimney rebuild in Evansville usually runs $2,500 to $7,000, while a full rebuild costs $9,000 to $18,000. The difference is how far the damage runs and how many courses of brick come down. A crown rebuild alone is $800 to $2,000. The written estimate after inspection sets the final price. Call (833) 365-6875.
Is HeatShield resurfacing or a full liner cheaper?
HeatShield resurfacing is cheaper, typically $1,200 to $2,800 versus $1,800 to $5,500 for a full DuraFlex liner install. It works when the existing tile is structurally sound and the joints are the only problem. If the flue is unlined or the tile is missing, a full liner is the right fix. An inspection tells you which one applies. Call (833) 365-6875 for a free estimate.
How long does a chimney liner last?
A properly installed stainless liner typically lasts decades, with heat-rated insulation protecting it from the flue gases that break down older construction. HeatShield resurfacing is expected to last similarly when installed correctly. Both need a sweep and inspection on a regular schedule to stay in good shape. Call (833) 365-6875 to book one.
Can you fix a cracked chimney crown without a rebuild?
Yes, in most cases. A cracked crown is usually rebuilt or replaced for $800 to $2,000, well under the cost of a partial or full rebuild. The catch is timing. A crown that’s let water into the brick for several winters in Evansville’s freeze-thaw conditions can turn a small repair into a bigger one. Call (833) 365-6875 for a free estimate before the damage spreads.
What Happens When You Call
We answer 24/7. A call outside dispatch hours is booked into the next opening, Sunday through Friday, 7am to 7pm. Same-day service is possible when the schedule allows, and free estimates are always available. From the firebox to the crown, we handle the inspection, the sweep, and the repair in one visit, so you don’t have to call a second contractor. Our technicians have up to 13 years of experience, and we work with the materials the pros specify: DuraFlex, HeatShield, Gelco, Olympia Chimney, Famco, and Copperfield. If you’ve been told by a home inspector or insurer that action is required, or you’ve just moved into a home with a fireplace whose history you don’t know, that’s exactly the call we take. For homeowners throughout Evansville, we’ll tell you what we find, lay out the options, and let you decide. Call (833) 365-6875 for a free estimate.
Written by the team at Chimney Sweep Evansville.
Pricing reflects the Evansville market as of 2026. Chimney Sweep Evansville offers free estimates – call (833) 365-6875.
What Our Customers Say
"Fireplace had never drawn properly since we moved in. He found the damper was only opening halfway due to a bent linkage and fixed it in ten minutes."
- Shane Quinn"Good work. The written inspection report took about a week to arrive after I asked for it, which was slower than I expected."
- Jennifer Delaney"Cap keeps the birds out now, which after two springs of scratching noises is worth every penny."
- Travis Bennett