Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Gelco Chimney Cleaning in Chandler, IN
We provide independent Gelco chimney cleaning and service across Chandler, IN, and the one thing that sets our work apart here is what we find inside older chimney systems: stove flues that were never sized or lined for the wood stoves that feed them. We’ve been serving Chandler homeowners since 2013, and in that time the same pattern has repeated in house after house. A sweep is often where the real work starts. Call (833) 365-6875. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday.
Why Chandler Residents Choose Us for Gelco Service
Gelco equipment has its own habits, and knowing those habits saves you money. We’re an independent service provider, which means we answer to you rather than to a manufacturer’s script. We’ve worked on Gelco stoves, inserts and fireplaces long enough to recognize the signature failures: the gasket that’s letting air past the door, the baffle that’s warped out of shape, the creosote that’s glazed onto a cold flue wall.
Chandler is small enough that a generalist chimney company can’t build the same depth of experience with one brand. We can. We inspect before we sweep, so you know exactly what’s up there before anything gets cleaned. Then we tell you what we found in plain language, with no upsell pressure. From the firebox to the crown, we handle it all in one visit, and we use the same materials the pros specify: DuraFlex, HeatShield, Copperfield.
Scheduling is straightforward. Call, tell us what your stove is doing, and we’ll book a time that works.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Common Gelco Chimney Cleaning Problems We Solve in Chandler
- Cracked clay tile liners under wood stove heat. Clay tiles in older Chandler homes crack under the high heat a Gelco wood stove throws, especially when the flue is undersized for the stove’s output. Once a tile cracks, hot gases and creosote can reach the surrounding masonry. A Level 2 inspection with a camera shows exactly where the damage is.
- Heavy, glazed creosote in Gelco inserts. Creosote buildup in Gelco inserts runs heavier because the flue passes through a masonry chimney that stays cold, so smoke condenses on the walls and glazes. Glazed creosote doesn’t brush off with a standard sweep. It takes specific removal work before the flue is clean.
- Degraded door gaskets and glass seals. Freeze-thaw cycles in Chandler work on gaskets and glass seals the same way they work on exterior masonry. When a gasket degrades, air gets in where it shouldn’t, and the burn runs hot and uneven. Replacing the gasket restores control over the fire.
- Warped or rusted dampers and baffles. Years of heavy winter use warp and rust damper and baffle components in Gelco inserts, which throws off draft and can push smoke back into the room. These are critical parts, and we fit them with OEM Gelco components so the stove operates as designed.
- Undersized or unlined flues behind Gelco stoves. Many Chandler chimneys were fitted for wood stoves back when flue sizing wasn’t handled the way it is now. We find undersized and unlined flues regularly, and a sweep can’t make an unlined flue safe on its own.
Gelco Service in Chandler: What Local Conditions Mean for Your Equipment
Chandler’s housing stock is largely older, small-town stock: mid-20th-century single-family homes and farmhouses, many with original masonry chimneys and clay tile liners. When a Gelco wood stove or insert was added to one of these homes years ago, the flue behind it often wasn’t resized or lined to match. That’s why a routine sweep here so often turns into a relining project before the chimney can go back into service.
In many Chandler homes, a Gelco wood stove or insert has been burning hard through long winters, building a thick glaze of creosote in an undersized or unlined flue. A qualified technician typically finds cracked clay tiles or heavy stage-3 creosote during a Level 2 inspection, then recommends relining and a thorough sweep before the stove is safe to use again. The fix usually means installing a properly sized stainless liner and removing the creosote, which restores safe draft for the next heating season.
Freeze-thaw cycles add a second layer of wear. Exterior masonry and crowns take the brunt of it, which is why we inspect the whole system, not just the flue interior. We handle Gelco work with the same care as any other brand we service.
Gelco Models & Products We Service in Chandler
We service the full spread of Gelco products found in Chandler homes: plate-steel freestanding wood stoves, wood-burning fireplace inserts, gas fireplace inserts, and zero-clearance fireplaces. Each type has its own service routine and its own set of parts that wear.
For critical components like baffles, gaskets and dampers, we fit OEM Gelco parts to keep the unit operating safely. For caps and flashing, quality aftermarket parts are a reasonable choice, and we’ll say so rather than push the more expensive option. If we open up a stove and find a cracked firebox or an unlined flue, we’ll tell you plainly that relining or replacement may be the safer investment. Repair is usually the better call for a well-built Gelco stove. Call (833) 365-6875.
See the difference
Before
After
Before
After
Before
AfterGelco Service Pricing in Chandler
Chimney sweep pricing is straightforward per job: the written estimate sets the final price, and the estimate itself is free. A sweep for a Gelco stove or insert typically runs $180 – $340. A Level 2 inspection with camera typically runs $250 – $450, and the photo report is included so you can see what we saw. Gasket and damper replacement typically falls in the $150 – $400 range. Relining a flue that’s undersized or unlined typically runs $2,500 – $6,000 depending on flue length and configuration.
What drives the spread: flue condition, whether the creosote is glazed, and whether a liner has to replace an unlined or cracked flue. A word on the relining figures: it’s the number that makes people hesitate, and we understand why. Nothing moves forward without camera evidence you can view yourself. Call (833) 365-6875 for an exact quote. Estimates are free.
Serving Chandler, IN – Our Local Coverage Area
We serve Chandler and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Gelco Chimney Cleaning in Chandler
My Gelco wood stove has a strong creosote smell. Does it just need a sweep?
Not necessarily. A creosote smell often points to a draft problem or glazed creosote in a cold flue, and a sweep alone won’t correct either. We inspect first, then say what the flue actually needs. Call (833) 365-6875 for a free estimate.
Can you sweep a Gelco insert without removing it?
In most cases yes, though some insert sweeps need the unit pulled to reach the full flue. We’ll tell you before we start. Call (833) 365-6875.
How often should a Gelco wood stove chimney be cleaned in Chandler?
Once a year is the baseline for a wood stove in heavy winter use, and many Chandler households should sweep more often if they burn daily through the cold months. Call (833) 365-6875 to book.
My Gelco gas insert hasn’t been serviced in years. What’s involved?
A gas insert service covers the burners, the venting and the seals, plus a check for obstruction. Gas work is not a DIY job: an annual check by a trained technician keeps the unit burning safely. Call (833) 365-6875.
Does Chandler’s freeze-thaw weather affect my Gelco chimney?
Yes. Repeated freeze-thaw cycles deteriorate exterior masonry and crowns, and the same cycling wears the gaskets and glass seals on your Gelco unit. Call (833) 365-6875 for an inspection.
Service Areas Near Chandler
We serve Chandler and the surrounding area, including Evansville, Melody Hill, Highland, Newburgh and Boonville. If you’re nearby and not sure whether we cover your address, ask. Call (833) 365-6875.
Book Your Gelco Service in Chandler Today
Book your Gelco chimney cleaning in Chandler before the heating season starts. Call (833) 365-6875. We answer 24/7, and fast dispatch runs from 7am to 7pm Sunday through Friday. The estimate is free, the price is set per job by the written estimate, and nothing gets recommended without camera evidence you can see. Reach us today to get on the schedule.
Written by the team at Chimney Sweep Evansville.